Cost guide · 2026-08-14
How much does ductwork installation cost per linear foot?
Ductwork (air duct / AC duct) install runs $25-$55 per linear ft in 2026. By home size $2,000-$16,500; full replacement $45-$55/ft; sealing-only $25-$35/ft. Static pressure checked before and after.
200+ Reviews
5.0 on Google
Accredited
BBB A+ Rating
CSLB Licensed
#998538
Quick answer
Ductwork installation typically runs $25 to $55 per linear foot in 2026. Sealing-only $25-$35/ft; partial replacement $35-$45/ft; full replacement with R-8 insulated flex $45-$55/ft. Average home has 100-200 linear ft, so total jobs land $2,500-$11,000. By home size, whole-house ductwork runs about $2,000 to $7,200 on a 1,200 to 1,500 sq ft home and up to $16,500 on a 2,500 sq ft-plus home. "Air duct," "AC duct," and "ductwork" all mean the same system at the same price. Static pressure measured before and after every job.
Ductwork is the part of your HVAC system you never see and that determines whether your AC and furnace actually work. National pricing per HomeGuide runs $25-$55 per linear foot installed across 2026. Local pricing across our High Desert and Inland Empire service area tracks national averages, a slight premium for R-8 insulated flex (mandatory at High Desert attic temperatures of 140°F+ and Inland Empire valley attics that hit 130-140°F in summer) and a slight discount on labor for crews already onsite during system installs. Multi-zone duct rebalancing is a common Inland Empire job in larger Etiwanda, Alta Loma, and Mission Grove homes. Static pressure measured before and after every job.
See these numbers in context on our ductwork and air duct service in Hesperia page.
What it costs
Real numbers, not estimates.
| Range | Tier | What it covers |
|---|---|---|
| $25-$35 per ft | Sealing + insulation only | Existing ducts in good shape, mastic-sealed at joints, R-8 insulation added. |
| $35-$45 per ft | Partial replacement | Bad runs replaced, good runs kept and sealed. |
| $45-$55 per ft | Full replacement | All ducts removed and replaced with R-8 insulated flex. |
| $2,500-$11,000 | Total job range | 100-200 linear ft typical HD home, depending on scope. |
| +$500-$1,500 | Return-air right-sizing | Most HD tract homes have undersized returns that strangle blower. |
Range based on JC Energy Solutions ductwork invoices across the High Desert. Static pressure measured before and after every job to verify airflow improvement.
By home size
Air duct cost by home size.
Ductwork is priced per linear foot ($25 to $55 installed), but most homeowners want the whole-house number by square footage. A rough rule for High Desert and Inland Empire tract homes: figure about one linear foot of duct for every 12 to 15 square feet of conditioned space. The low end of each range below is a seal-and-insulate on ducts still in good shape; the high end is a full R-8 flex replacement. "Air duct," "AC duct," and "ductwork" all mean the same system, so the price does not change with the word you use.
| Home size | Typical cost | What's included |
|---|---|---|
| 1,200-1,500 sq ft | $2,000-$7,200 | ~80-130 linear ft. Seal-only at the low end, full replacement at the high end. |
| 1,500-2,000 sq ft | $3,000-$9,400 | ~120-170 ft. Most High Desert tract homes land here. |
| 2,000-2,500 sq ft | $3,800-$12,100 | ~150-220 ft. Often includes a return-air right-size. |
| 2,500-3,500+ sq ft | $5,000-$16,500 | ~200-300+ ft. Custom Apple Valley Hills and Oak Hills homes. |
Replacement
Cost to replace ductwork.
Replacing ductwork, meaning pulling the old runs and installing new R-8 insulated flex, runs $45 to $55 per linear foot, so a full AC duct replacement on a typical High Desert home lands $4,500 to $11,000. You need a replacement rather than a seal when the insulation has broken down, the ducts are crushed or rodent-contaminated, or the runs were undersized from day one and strangle the blower. If only some runs are bad, a partial replacement at $35 to $45 per foot keeps the good runs and swaps the rest. We measure static pressure before and after so you can see the airflow actually improved, and if the replacement rides along with an AC or furnace install, the shared setup labor knocks $500 to $1,500 off the standalone price.
What drives the price up
Why your quote might be higher.
-
Full replacement vs. sealing
Full replacement (remove old ducts, install new R-8 insulated flex) costs ~80% more than sealing-only on the same linear footage. Replacement needed when insulation is degraded, ducts are undersized, or rodent contamination is present.
-
Larger HD homes
Custom Apple Valley Hills or Oak Hills homes (2,500-4,000+ sq ft) have 200-300+ linear ft of duct vs. 80-150 ft for tract homes. Larger jobs scale proportionally.
-
Attic accessibility
Cramped or low-clearance attics add labor time. HD attics with R-30 insulation are easier to work in than attics with insufficient flooring or low truss clearance.
-
Zoning damper system add-on
Adding zoning dampers for multi-level or multi-zone temperature control adds $1,500-$3,500 to ductwork jobs. Typically combined with full replacement.
What drives the price down
How to save money.
-
Sealing-only when ducts are healthy
If existing ducts are properly sized, well-insulated, and intact, mastic sealing alone fixes air leaks (typically 20-30% loss on un-sealed ducts) without full replacement cost.
-
Combined with system install
Ductwork done as part of a full AC or furnace install saves $500-$1,500 in mobilization and setup labor vs. standalone duct job.
-
Easy attic access
Standing-height attics with proper flooring and lighting reduce labor time vs. cramped or insulation-buried installs.
Rebates that apply in 2026
Real rebates.
No direct duct-specific rebates currently offered by SCE or SoCalGas. However, SCE high-efficiency heat pump rebates and SoCalGas 95%+ AFUE furnace rebates often require properly sized and sealed ducts as part of the install spec, so duct work is captured in those system rebates indirectly. Federal IRA tax credits expired December 31, 2025.
Honest take from the owner
Joey's straight answer.
Joey's honest read: most HD homes have one undersized return duct that has been strangling the blower for 15+ years. Return-side restriction drops cooling capacity 15-25% and shortens equipment life. Fixing this single issue often delivers more performance gain than upgrading from a SEER 14 to a SEER 16 system would. We measure return static pressure on every diagnostic and flag undersized returns as part of the repair-vs-replace conversation. For homes considering full duct replacement: the math usually favors doing it as part of a system replacement rather than standalone, because mobilization labor is shared. If your AC or furnace is also nearing end of life, get duct work and equipment replacement quoted together.
Related guides
Keep researching.
AC Repair Cost High Desert (2026)
AC repair runs $150-$850 in 2026 (national avg $369). Capacitor $150-$300, refrigerant $300-$600, co...
Read guide →Furnace Replacement Cost (2026)
Furnace replacement runs $3,200-$7,800 installed in 2026. 80% AFUE entry $3,200-$4,800, 90%+ AFUE $4...
Read guide →Heat Pump vs Furnace Cost (2026)
Heat pumps cost $4,500-$11,000 vs $3,200-$7,800 for gas furnaces. Heat pumps can lower combined ener...
Read guide →Mini-Split Install Cost (2026)
Mini-split installation runs $2,000-$4,500 per zone in 2026. Single-zone $2,000-$4,500; multi-zone $...
Read guide →Service area
Pricing applies across every city.
These cost ranges hold across our entire service area: flat-rate diagnostic, no travel premium, same crew from our Hesperia office.
High Desert · 9 cities overview →
Financing available · GreenSky + Wisetack
See financing options →200+
Five-star reviews
A+ Accredited 2020
ACCA · EPA 608
Certified technicians
Preferred Vendor
7+ yrs
Family-owned
24/7
$0 diagnostic w/ repair
Factory-authorized dealer:
